Microscan MS-Q Imager Instrukcja Użytkownika Pobierz pdf (Strona 56)

Bluetooth Overview

This Bluetooth version of the MS-Q includes an internal Bluetooth® wireless radio. The

radio allows for point to point wireless communication with other Bluetooth devices that

support serial port protocol (SPP).

For quick setup information for connecting your Bluetooth Imager with the Microscan

Bluetooth modem, see “Bluetooth Interface” on page 1-6.

Once a MS-Q is connected, the application software on the host must be open to

receive data with a communications program such as HyperTerminal.

Terminal Default Settings

Baud = 9600

Parity = None

Stop Bits = One

Data Bits = Eight

Flow Control = None

Specifications

The MS-Q Bluetooth radio is a Class 1 device. If connected to another Class 1 device the

MS-Q has roughly 100 meters (328 feet) line of sight operating range. If connecting to

a Class 2 or Class 3 device, the operating range may drop to match the lower range.

Operation

When the MS-Q detects the radio is out of range, the MS-Q will store data on the

Imager’s non-volatile memory. The Imager will continue to try and send data until radio

is back in range. Once the data is sent, the data will be erased from the units memory

unless the Batch Mode is set for

Send & Log

. If the radio cannot connect in 90 seconds,

it will emit an error beep. The Imager will continue to try to connect until it has reached

the programmable radio timeout setting.

If the MS-Q Imager is saved in Bluetooth RF Two-Way Mode and Autoconnect is

enabled (as it is by default), it will automatically attempt to reconnect with the host

modem whenever:

1. The Imager is powered-on.

2. The Imager attempts to read another symbol.

Another consideration is access. You choose Private when you want to limit access to

only one Imager. You choose Shared when you want more than one Imager to have

continuous access.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 203 204

Brak uwag

Microscan MS-Q Imager Instrukcja Użytkownika Strona 56